UV Oraguard 215 polymeric PVC film in a glossy finish on 105 cm roll.
UV Oraguard 215 polymeric PVC film with high level of UV protection. Extends the durability of prints to 3 yeara.
- For the protection of digitally printed large-format displays
- For medium-term outdoor applications
- Thickness (without protective paper and adhesive): 75 µm
- Adhesive: solvent polyacrylate, permanent
- Release paper: silicone coated paper, white 90 g/m2
- Temperature resistance: adhered to aluminium -50°C,/b> to +90°C no variation
- Adhesive power (FINAT TM 1, after 24h, stainless steel): 12 N/25mm
- Tensile strength (DIN EN ISO 527)
-
- along: min. 19 MPa
- across: min. 19 MPa
- Elongation at break (DIN EN ISO 527)
- along: min. 130%
- across: min. 150%
- Application temperature: > +8°C
- Resistance to solvents and chemicals: at room temperature, 72h after adhesion to aluminium, resistant to water, cleaning agents, alcohol and aliphatic solvents
ATENTION: Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any other
contamination that could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry
for at least three weeks and to completely cure. The compatibility of selected lacquers and paints should be tested by the
user, prior to application of the material. Furthermore, the application information published by ORAFOL must be considered.
The batch traceability according to ISO 9001 is possible on the basis of the roll number.