Glossy, self-adhesive photoluminescent film Oracal 9300 - glow in the dark
- Thickness - 150 microns
- Dimension - 1 x 1 m
- Light yellow special PVC film, cadmium-free,
- Surface matt - silky
- The foil gives an intense and long-lasting effect of secondary lighting after switching off the light source
- The foil can be used many times without any deterioration of the luminescent properties
- Contains no radioactive materials
- Glow-in-the-dark foil will be especially useful in emergency situations after turning off the light source
- Ideal for indoor evacuation and fire safety signs
- Printing techniques: screen printing
- Durability 5 years
TECHNICAL DATA
- permanent adhesive: solvent-based polyacrylate
- covering material: silicone-coated paper on one side, 148 g/m2
- glow effect (DIN 67510-Jan.1992)
- after 10 minutes: 20mcd/m2
- after 60 minutes; 2.8 mcd/m2
- decay time (DIN 67510-Jan.1992): 340min (0.3 mcd/m2)
- dimensional stability (FINAT TM14): glued on steel, it shows no measurable shrinkage in the transverse direction; in the longitudinal direction <0.3mm
- Water resistance (DIN50021): stuck on aluminum after 100 hours/23°C shows no change
- temperature resistance: glued on aluminum -40st.C to +100st.C, in a short time, max. after 24h, at +100st.C shows no changes
- flammability class (DIN 53 438 T3): F1
- adhering strength (FINAT - test method I, after 24 hours, stainless steel): 18 N/25 mm
- tear resistance (DIN EN ISO 527): longitudinal: min. 12MPa, transverse: min. 10MPa
- tensile strength (DIN EN ISO 527) , longitudinal: min. 100%, transversal: min. 100%
- recommended application temperature: above +8 degrees C
- shelf life (in original packaging, at 20oC and 50% relative humidity): 2 years
ATTENTION
The surface on which the foil is applied must be cleaned of dust, grease and other contaminants that could adversely affect the adhesion of the product. Freshly varnished or painted surfaces should be allowed to dry for a minimum of 3 weeks. The possibility of using selected varnishes or paints with self-adhesive foil should be checked before the final gluing of the foil. Before sticking the foil, check whether there are any chemical reactions between the foil and the substrate. In addition, any information on film application published by Orafol Europe GmbH (http://www.orafol.com) should be taken into account.