ORALITE VC212 High Performance - blue
Retroreflective vehicle livery film, perfect for lettering. High reflectivity (RA2/C), complies with EN 12899-1.
The Orafol® ORALITE® VC 212 HIPerformance is a self-adhesive vehicle livery that is resistant to solvents and tough outdoor conditions. It is easy to cut and plot. That makes the product ideal for the creation of lettering.
ORALITE® VC 212 HIPerformance is composed of cube corner (microprism) retroreflective elements integrally bonded to a
flexible, smooth-surfaced tough and weather resistant UV stabilised polymeric film. The prism surfaces are coated with a
vacuum deposition of aluminium to provide a mirror surface to the prism facets. The resulting material is not more than
0,20 mm thick, and comes with an aggressive high-tack pressure sensitive adhesive. It is single layer, with no need for edge
sealing. Printing on the material is not recommended.
- Thickness (without protective paper and adhesive): 200 µm
- Outer layer: flexible foil, metallised
- Adhesive: solvent-based polyacrylate, removable
- Recommended sticking temperature: +15°C
- The material is not printable
APLICATION
Material must be applied when the air and surface temperature is between 15° C and 38° C to assure proper adhesive
bonding. Surfaces must be cleaned for all grease, oil and dirt. Use a clean towel and Isopropyl alcohol or similar to wipe the
surface before application. If any air bubbles are trapped, use a pin to puncture the bubble and a squeegee to push the air
towards the pinhole. Contact ORAFOL for complete application instructions.
ATENTION: Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any other
contamination that could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry
for at least three weeks and to completely cure. The compatibility of selected lacquers and paints should be tested by the
user, prior to application of the material. Furthermore, the application information published by ORAFOL must be considered.
The batch traceability according to ISO 9001 is possible on the basis of the roll number.